Color Cosmetics

Auto Corrector Stick for Skin Discoloration (Light Shade)

Author Image

By: TOM BRANNA

Editor

Auto Corrector Stick for Skin Discoloration (Light Shade)
Ingredients
%

Phase A

  • Vegelight 1214LC (Grant Industries) (Coconut alkanes (and) coco-caprylate/caprate)
  • 11.00
  • SD Soft Violet SL300 (Sandream) (Mica, TiO2, SiO2, SnO2)
  • 7.00
  • SD Soft Green SL500 (Sandream) (Mica, TiO2, SiO2, SnO2)
  • 7.00
  • MicaMira-Ice ROG065 (Sandream) (Mica, TiO2, SiO2, SnO2)
  • 7.00
  • Liponate IPP (Lipo) (Isopropyl palmitate)
  • 5.00
  • SD Soft Cover Powder SF 515 (Sandream) (Mica, MgO)
  • 4.50
  • Serecite T30H (Sandream) (Mica, TiO2)
  • 4.50
  • Anybes (Presperse) (Nylon 12)
  • 4.00

Phase B

  • Sansil 260 (Sandream) (Dimethicone, dimethicone/vinyl dimethicone crosspolymer
  • 12.00

Phase C

  • Ecoperse White 55% (Sandream) (TiO2, octyldodecyl olivate)
  • 6.88
  • Ecoperse Yellow IO 45% (Sandream) (Yellow iron oxide, octyldodecyl olivate)
  • 0.94
  • Ecoperse Red IO 45% (Sandream) (Red iron oxide, octyldodecyl olivate
  • 0.32
  • Ecoperse Black IO 65% (Sandream) (Black iron oxide, octyldodecyl olivate)
  • 0.18

Phase D

  • Octyldodecyl Olivate (Sandream) (Octyldodecyl oleate)
  • 8.73
  • Jarcol I-20CG (Jarchem) (Octyldodecanol)
  • 8.00
  • Jeenate 5H (Jeen) (Polyethylene)
  • 6.75
  • Carnauba Wax (Strahl and Pitsch) (Copernicia cerifera)
  • 3.00
  • Synchrowax HRC (Croda) (Tribehenin)
  • 2.00
  • Softisan 649 (Cremer Oleo) (Bis-diglyceryl polyacyladipate)
  • 1.00
  • Propyl paraben (Sandream) (Propyl 4-hydroxybenzoate)
  • 0.10
  • Butyl paraben (Sandream) (Butyl 4-hydroxybenzoate)
  • 0.10

Procedure

Weigh phase A into beaker and mix with propeller until thick paste is formed. Add phase B, silicone, to phase A and mix until uniform, heating to 45°C. Continue to phase C, color dispersions, and add to phase A and B maintaining the temperature at 45°C. Premix phase D in separate beaker, heating to 85-90°C until a clear, homogeneous solution forms. Increase beaker temp of phase A ,B, C to 85-90°C. Add phase D to A, B, C and mix under moderate speed until a smooth mixture is present. Pour hot product into stick mold after solution is completely uniform. Let mixture set up at room temperature and then transfer to freezer, 0°C, for 10 minutes to enable easy release from molds.

More Information

Sandream Enterprises, LLC 973-822-3077 • Fax: 973-882-3088 Website: www.sandreamllc.com